1 AiM User Guide Kit for EVO4, Solo and SoloDL on Ducati 848, 1098, 1198 Release 1.01
9 Connect AiM wiring to Ducati wiring as here on the right. Take the cable to the logger as here on the right. To reach SoloDL make the cable pass b
10 The image here on the right shows the cable reaching SoloDL. Connect the cable to SoloDL as here on the right.
11 4 Configuring with Race Studio 2 Before connecting EVO4/SoloDL to the ECU set it up via Race Studio 2 software. 4.1 Configuring SoloDL Run the so
12 The software shows SoloDL configuration page: press “Configuration Manager” and select the configuration you want to use or press “New” to create
13 4.2 Configuring EVO4 Run the software, press “Device configuration” on the software left keyboard and select “EVO4” in the panel that shows up on
14 The software shows EVO4 configuration page: select the configuration you want to use or press “New” to create a new one. In this second case “New
15 5 Ducati protocols Channels received by SoloDL and EVO4 connected to Ducati "1098/S" protocol are: ID CHANNEL NAME FUNCTION ECU_1 DUCA
1 1 Models and years This user guide explains how to install AiM Solo and SoloDL on Ducati bikes and how to connect EVO4 and SoloDL to the bike Engi
2 2.1 Kit and bracket for Solo/SoloDL Solo/SoloDL installation kit is shown here below; part number is: V02569170CS. The kit includes: • 1 bracket
3 2.2 AiM cable for SoloDL AiM cable for SoloDL on Ducati bikes is shown below; its part number is: V02569170. The image here below shows the cable
4 2.3 AiM cable for EVO4 AiM cable for EVO4 on Ducati bikes is shown below; its part number is: V02563150. The image here below shows the cable cons
5 3 Installation and connection Here you find the instructions to install Solo and SoloDL on your Ducati bike and to connect EVO4 and SoloDL to the
6 Remove the screw of the steering wheel dumper collar enlarging the collar. Slide off the stem of the steering wheel dumper. Remove the screw that
7 Replace the steering wheel dumper collar using the proper screw and locking AiM bracket for Ducati between collar and fork plate. Replace the stem
8 3.2 Connection of SoloDL and EVO4 to the bike ECU To connect EVO4 and SoloDL to the ECU of the bike use the connector you find under the passenger
Kommentare zu diesen Handbüchern